Incoloy 800H / 800HT Bar
5
Nov-04/2024
Incoloy 800H / 800HT Bar DescriptionIncoloy 800H is a nickel-based alloy containing approximately 22% chromium, 39% iron, and 33% nickel, with the balance being carbon, silicon, manganese and other elements. This alloy has excellent high temperature resistanceas its &nb
- Categories:Alloy Bar
- tages:
Incoloy 800H / 800HT Bar Description
Incoloy 800H is a nickel-based alloy containing approximately 22% chromium, 39% iron, and 33% nickel, with the balance being carbon, silicon, manganese and other elements. This alloy has excellent high temperature resistance as its maximum operating temperature can reach 1100°C, and it also has good toughness and ductility at room temperature. In addition, Incoloy 800H can maintain a long service life in high temperature environments with excellent oxidation resistance and corrosion resistance. Incoloy 800H bar has good processing properties and can be used for hot and cold processing. During thermal processing, the heating temperature and cooling rate should be controlled to avoid cracks and deformation.
Product Parameters
Product Name | Incoloy 800H / 800HT Bar | |
Outer Diameter | Round Bar | 4mm-500mm |
Hexagon Bar | 18mm-57mm (11/16″ to 2-3/4″) | |
Square Bar | 18mm-47mm (11/16″ to 1-3/4″) | |
Flat Steel | 1/2 "to 10", Thickness: 2mm-150mm, Can provide customized | |
Length | 1-6 meters, Length can be customized | |
Standard | ASTM, AISI, JIS, GB, DIN, EN, etc. | |
Surface | Black, Bright Polished, Rough Turning, Matt Surface Treatment, NO.4, BA, etc. | |
Certificate | ISO, SGS, BV | |
Production Technology | Hot Rolling, Cold Rolling | |
Chemical Composition
C | Al | Si | S | Ti | Cr | Mn | Fe | Ni | Cu |
0.1 max | 0.15 - 0.60 | 1.0 max | 0.015 max | 0.15 - 0.60 | 19.0 - 23.0 | 1.5 max | 39.5 min | 30.0 - 35.0 | 0.75 max |
Mechanical Properties
Tensile Strength (ksi) | 0.2% Yield Strength (ksi) | Elongation% in 2 inches |
75 | 30 | 30 |
Physical Performance
Units | Temperature in°C | |
Density | 7.94 g/cm³ | Room |
Specific Heat | 0.11 Kcal/kg.C | 21° |
Melting Range | 1357-1385°C | - |
Modulus of Elasticity | 196.5 KN/mm² | 20° |
Electrical Resistivity | 98.9 µΩ.cm | 20° |
Coefficient of Expansion | 14.4 µm/m °C | 20 - 100° |
Thermal Conductivity | 11.5 w/m-° K | 20° |
Scope of Application
Used in industrial furnaces, heat treatment equipment, chemical and petrochemical processing, superheaters and reheaters in power plants, pressure vessels, heat exchangers, etc.
-
